We detected, that your browser supports another langugae than the called one. This page is also available in your language! Would you switch to this page in your language?
CMF 300 Sharpening machine for machining of clearance surfaces on carbide-tipped circular saw blades
THE MACHINE CONCEPT
Those who want to produce accurate metal cutting saw blades must not only pay attention to basic parameters, such as accuracy of the saw blade hole and the appropriate clamping system, they must also ensure that the process is as stable as possible and that the sharpening machine has a high level of rigidity.
The unique machine concept of the CMF 300 combines the face grinding method with automatic measuring. The CMF 300 also offers extreme rigidity, which leads to an excellent surface quality and geometries when side machining metal-cutting circular saws.
THE OPERATING CONCEPT
The familiar VOLLMER user interface guarantees maximum operating convenience, quick familiarization of the operating staff and efficient operation of the machine. A wide variety of tooth shapes offers a high level of flexibility for the production of metal-cutting circular saws. At the same time, the machine's convenient programming reduces the set-up time.
CMF300 | |
---|---|
WORKPIECE DATA | |
CIRCULAR SAW BLADES | |
Circular saw blades with outside diameter | 200 - 1440 mm |
Circular saw blades with bore diameter | 16 - 180 mm |
Circular saw blades with blade thickness | < 15 mm |
TOOTH GEOMETRY | |
Grinding length on the side angles | < 25 mm |
Tangential clearance angle | 0 - +10° |
Radial clearance angle | 0 - +5° |
Hook angle | -35° - +35° |
Tooth pitch | 6 - 180 mm |
TOOLING DATA | |
SPINDLE(S) | |
INTERFACES | |
Electrical connected load | 8,7 kVA |
Pneumatic pressure | 0,6 - 1 MPa (6 - 10 bar) |
INTERNAL COOLANT UNIT | |
Coolant tank | 230 l |
Your Contact
Ehinger Straße 34
88400 Biberach/Riß
Germany
Phone: +49 7351 5710
Fax: +49 7351 571130
info@vollmer-group.com